All grade guides — one page, every alloy we cover
Browsing for a grade? The full library of per-grade technical guides is on one list.
Open the listZirconium 702 (UNS R60702) is commercially pure zirconium, and it is the alloy you reach for when the medium defeats everything else: hydrochloric acid at all concentrations up to boiling point, hot organic acids such as acetic and formic acid, and urea plant environments where even C-276 is marginal. It is roughly 25 % lighter than 316L stainless, it is nearly transparent to thermal neutrons, and its corrosion behaviour is the mirror image of titanium's — superb in reducing acids, destroyed by oxidising ions. This guide collects the verified ASTM numbers and the selection rules we apply when quoting Zr 702 plate, bar, tube and forgings.
Zirconium 702 (UNS R60702) is unalloyed zirconium with a minimum 99.2 % Zr+Hf and up to 4.5 % hafnium. It owes its extraordinary acid resistance to a dense, tightly adherent ZrO₂ passive film that repairs itself instantly — provided the environment contains no aggressive oxidising species. Its passive chemistry makes it the reference metal for reducing media: hydrochloric, sulfuric (mid-range), acetic, formic and lactic acids, plus hot alkalis and urea synthesis environments. Unlike most exotic metals, it is also easy on weight (6.51 g/cm³, about 25 % lighter than stainless steel) and reasonably ductile, so it fabricates like a metal rather than like a refractory.
| Element | Content (wt %) | Why it matters |
|---|---|---|
| Zirconium + Hafnium (Zr+Hf) | 99.2 min | Commercially pure zirconium — the basis of the passive film and of the acid resistance |
| Hafnium (Hf) | 4.5 max | Chemically almost identical to Zr; for corrosion duty it is harmless (it matters only in nuclear fuel-clad grades, where Hf must be stripped out) |
| Iron + Chromium (Fe+Cr) | 0.20 max | Trace residuals — also the reason dedicated tooling is required in fabrication (see welding section) |
| Oxygen (O) | 0.16 max | Interstitial strengthener — this is what gives CP zirconium its strength band |
| Carbon (C) | 0.05 max | Interstitial control |
| Nitrogen (N) | 0.025 max | Too much N degrades corrosion resistance; tightly limited |
| Hydrogen (H) | 0.005 max | Hydrogen is zirconium's enemy — hydride precipitation embrittles the metal (see corrosion section) |
Minimum values in the annealed condition, cross-checked against the governing ASTM product specifications:
| Product / specification | Yield strength (0.2 %) | Tensile strength | Elongation |
|---|---|---|---|
| Sheet & plate — ASTM B551, annealed | ≥ 207 MPa | ≥ 379 MPa (55 ksi) | ≥ 16 % |
| Bar & wire — ASTM B550, annealed | ≥ 205 MPa (30 ksi) | ≥ 380 MPa (55 ksi) | ≥ 16 % |
| Forgings — ASTM B493, annealed | ≈ 207 MPa | ≈ 379 MPa | ≈ 16 % |
| Typical mill values (annealed) | [240–310] | [430–470] | [18–24] |
Procurement trap worth knowing: some supplier tables list "≥ 415 MPa UTS / ≥ 240 MPa YS" for R60702 — those are actually the ASTM B550 values for Zr 704 (R60704), the Zr-Sn grade. If your certificate shows 415/240, check the UNS number and the standard on the MTC before accepting the heat.
Zirconium loses strength gently with temperature: at 300 °C the annealed alloy still retains roughly two-thirds of its room-temperature tensile strength, which is why 702 equipment routinely runs hot in acetic-acid service.
| Property | Value |
|---|---|
| Density | 6.51 g/cm³ (vs 7.98 for 316L — ~25 % lighter) |
| Melting point | ≈ 1,852 °C (sources 1,850–1,855 °C) |
| Thermal conductivity (RT) | ≈ 22 W/m·K (better than 316L ≈ 15, better than titanium ≈ 16.4) |
| Specific heat | ≈ 270–280 J/kg·K |
| Thermal expansion (20–100 °C) | ≈ 5.5–5.9 ×10⁻⁶ /K — about one third of stainless steel; generous expansion loops are rarely needed |
| Modulus of elasticity | ≈ 97–99 GPa (one source lists 88 GPa; mill data usually 97–99) |
| Electrical resistivity | ≈ 40 µΩ·cm |
| Magnetic behaviour | Non-magnetic (paramagnetic); thermal neutron absorption cross-section ≈ 0.18 barns — the lowest of any common structural metal |
Selection rule: zirconium and titanium are mirror images. Titanium rules oxidising media (seawater, wet chlorine, nitric acid); zirconium rules reducing media (HCl, acetic/formic acid, urea). The most common field failure of Zr 702 is not general corrosion but hydrogen embrittlement — hydrogen uptake from galvanic coupling to less noble metals, misplaced cathodic protection, or hot reducing acid — so design against hydrogen pickup, not just wall loss.
| Industry | Typical Zr 702 components |
|---|---|
| Acetic acid / PTA | Reactors, columns, heat-exchanger tubing, pump internals handling hot acetic and formic acid |
| Fertilizer / urea | Urea stripper linings, high-pressure carbamate equipment, UAN service |
| HCl / chlor-alkali | HCl coolers, absorbers, transfer lines (oxidiser-free duty) |
| Pharmaceutical / fine chemicals | Process vessels and linings where product purity and acid duty overlap |
| Nuclear | Fuel cladding and structural components — 0.18 barn neutron cross-section (Hf-controlled grades) |
| Pressure equipment | Explosion-clad plate (Zr on steel) for tubesheets and vessel shells, rupture discs, flange facings, loose-lined nozzles |
No. Zirconium is paramagnetic and 702 is effectively non-magnetic at any condition, with negligible neutron absorption (≈0.18 barns) — one reason it is the standard structural metal inside nuclear reactors.
They are near mirror images. Zr 702 wins in reducing acids (HCl, acetic, formic) and urea service; Gr.2 wins in oxidising media — seawater, wet chlorine, nitric acid. Putting Zr 702 into chloride-containing seawater duty, or Gr.2 into hot HCl, are the two classic and very expensive specification mistakes.
Hafnium always accompanies zirconium in the ore and is chemically so similar that separating it is costly. For corrosion duty Hf is harmless. Only nuclear fuel-clad material requires Hf removal, which is why 'nuclear grade' and 'chemical grade' zirconium are priced differently.
About 400 °C is the accepted continuous limit in corrosive media. In air (no medium) zirconium begins to oxidise rapidly above roughly 500 °C, so bare 702 should not be used as hot-air furnace hardware — that is a job for nickel alloys such as Hastelloy X.
Send us your drawing or specification for a quotation — we reply within one business day.
Buy this grade as: Plate · Round bar · Seamless tube · Flanges · Forged rings