[email protected] WhatsApp +86 159 0085 2030 Qingpu, Shanghai Reply within 1 business day

Knowledge & insights

Short, practical articles from our engineering team — the same questions we get asked every week, written down so you can scan them before you email us. Topics cover grade selection, standards, fabrication, welding, and the kind of failure modes that should change a specification.

Stainless steel seamless tubes in warehouse

Grade guides library: one technical page per alloy

Composition, properties, corrosion behaviour, applications and standards for each grade — Inconel 625 and 718 already online, more added every week.

Open the library
Machined nickel alloy forged discs

Inconel, Hastelloy or Monel? Choosing the right nickel alloy family

The three famous brand names cover very different alloys. Which family fits which corrosion or temperature problem — and the selection rules that keep you out of trouble.

Read article
Stainless steel seamless tubes in warehouse

Alloy 825 vs Alloy 625: which one for your corrosive duty?

Both Ni-Cr-Mo workhorses, both on chemical-plant drawings, both mixed up on purchase orders. Where 825 is the right — and cheaper — answer, and where only 625 survives.

Read article
Packed export cases with quality documents

Sourcing specialty alloys from China: a 10-point buyer checklist

Price per kg is the least informative number in a quotation. How to qualify a supplier: traceability, honest heats, the documents to demand — and the red flags to walk away from.

Read article
Machined nickel alloy forged discs

Inconel 693 vs Inconel 690: when metal dusting decides the grade

Two high-chromium Ni-Cr-Fe alloys that often end up on the same shortlist — and the reformer / syngas service conditions where one is meaningfully better.

Read article
Super austenitic piping at a desalination plant

254SMO vs 904L vs AL-6XN: choosing a super-austenitic stainless

Three 6 %-Mo austenitic grades on the same shortlist. How to read the PREN number in context and pick the one that actually pays off in your service.

Read article
CNC machined PH stainless shafts and bolts

XM-25 vs 17-4 PH: a practical comparison for shaft and valve duty

Both are precipitation-hardening martensitic grades, but they are not interchangeable. When XM-25 (Custom 450) earns its premium over 17-4 PH.

Read article
Duplex stainless flanges at an oil and gas yard

2205 vs 2507: when to pay the super-duplex premium

Duplex 2205 handles most chloride service. Here is the short version of when you actually need super duplex 2507 — and when you don't.

Read article

More articles being added — we publish roughly twice a month. Tell us what you want us to write next: [email protected].

Have a question we should answer in an article?

If you have a real specification problem, send it through. If we think it would be useful to other buyers, we will write it up and credit you (or keep it anonymous, your call).