Plate from 0.5 to 200 mm thick in the grades that matter for corrosion and heat service — Inconel, Hastelloy, Monel, duplex and precipitation-hardening stainless. Cut to your drawing by waterjet, plasma or saw, with full traceability on every heat.
| Parameter | Our supply range |
|---|---|
| Thickness | 0.5 – 200 mm |
| Width × length | Up to 2 000 × 6 000 mm (mill plate) |
| Condition | Hot rolled, annealed, solution treated, PH aged |
| Finish / tolerance | No.1 / 2B / pickled · cut to length ±0.5 mm |
| Typical standards | ASTM B443 / B424 / B575 / B463, A240 |
Click any grade to open its full data sheet: composition, mechanical properties, corrosion behaviour and standards.
EN 10204 3.1 mill test certificate with every heat — chemistry, mechanicals and heat number matched to your packing list.
Waterjet, plasma, saw cutting and CNC finishing to your drawing — including heat numbers marked on each cut piece.
Third-party inspection (SGS / TUV / BV) welcome before shipment; seaworthy crates and bundles for export.