All grade guides — one page, every alloy we cover
Browsing for a grade? The full library of per-grade technical guides is on one list.
Open the listHastelloy X (UNS N06002, W.Nr 2.4665) is the solid-solution nickel-chromium-iron-molybdenum alloy that has defined gas-turbine combustion hardware for six decades: a Cr₂O₃-forming alloy with outstanding oxidation resistance to about 1,200 °C, good strength retention to 870–980 °C, and enough hot ductility to deep-draw the thinnest combustor liner sheet. It is emphatically not a wet-corrosion alloy — in liquid acids the C and B families do that work. This guide collects the ASTM numbers and the selection rules we use when quoting X sheet, plate, bar, tube and furnace hardware.
Hastelloy X (UNS N06002) is a solid-solution nickel-base alloy with roughly 21–23 % chromium, 18 % iron, 9 % molybdenum, 0.5–2.5 % cobalt and 0.2–1 % tungsten. The chromium forms a slow-growing, tenacious Cr₂O₃ scale that resists oxidation and spalling through extreme thermal cycling, while Mo + W carry the solid-solution strength. With 47 %+ nickel, X is immune to chloride stress-corrosion cracking, resists carburisation better than stainless steels, and — unusually for a 1,200 °C-class alloy — stays highly formable and weldable without ageing treatments. It has been the standard sheet alloy for combustor cans and transition ducts since the 1960s and remains the reference for industrial-furnace hardware in mixed atmospheres.
| Element | Content (wt %) | Why it matters |
|---|---|---|
| Nickel (Ni) | Balance (≈ 45–52) | Austenitic base; chloride-SCC immunity and hot-strength foundation |
| Chromium (Cr) | 20.5–23.0 | Cr₂O₃ protective scale — oxidation resistance to ~1,200 °C and spalling resistance under thermal cycling |
| Iron (Fe) | 17.0–20.0 | Cost and processability; keeps the structure fully austenitic |
| Molybdenum (Mo) | 8.0–10.0 | Solid-solution strengthening; retains yield at elevated temperature |
| Cobalt (Co) | 0.5–2.5 | Hot-strength and microstructure stability |
| Tungsten (W) | 0.2–1.0 | Secondary solid-solution strengthener |
| Carbon (C) | 0.05–0.15 | Deliberately NOT low — carbides pinned on grain boundaries give creep/rupture strength above ~800 °C (see FAQ) |
| Manganese / Silicon | 1.0 max each | Deoxidation and processing control |
Minimum values in the solution-annealed condition, with typical mill values in brackets:
| Condition / product | Yield strength (0.2 %) | Tensile strength | Elongation |
|---|---|---|---|
| ASTM B435 sheet / B572 bar — annealed minimum | ≥ 240 MPa | ≥ 655 MPa (95 ksi) | ≥ 35 % |
| Typical mill sheet (RT, annealed) | [360–380] | [760–790] | [43–49] |
| Typical mill plate (RT, annealed) | [≈ 340] | [≈ 760] | [≈ 49] |
Where X actually earns its keep is the elevated-temperature table — published typical tensile data for annealed sheet:
| Temperature | Tensile strength | Yield strength (0.2 %) | Elongation |
|---|---|---|---|
| 538 °C (1,000 °F) | ≈ 628 MPa | ≈ 253 MPa | ≈ 54 % |
| 649 °C (1,200 °F) | ≈ 580 MPa | ≈ 241 MPa | ≈ 66 % |
| 760 °C (1,400 °F) | ≈ 424 MPa (≈ 54 % of RT tensile) | ≈ 233 MPa | ≈ 96 % |
| 871 °C (1,600 °F) | ≈ 251 MPa | ≈ 193 MPa | ≈ 118 % |
Note that some producer tube specifications (e.g. AMS 5588 stockists) quote 827 MPa UTS / 345 MPa YS minimums for annealed tube — stricter than the generic B435/B572 table. Always compare like with like: product spec, product form, condition.
| Property | Value |
|---|---|
| Density | 8.22 g/cm³ |
| Melting range | 1,260–1,355 °C |
| Thermal conductivity (≈ 25 °C) | ≈ 9.2 W/m·K |
| Specific heat (RT) | ≈ 486 J/kg·K |
| Thermal expansion (26–100 °C) | ≈ 13.9 ×10⁻⁶ /K |
| Electrical resistivity (≈ 24 °C) | ≈ 1.15 µΩ·m |
| Modulus of elasticity (RT) | ≈ 205–207 GPa |
| Magnetic behaviour | Essentially non-magnetic (µ ≈ 1.002) |
| Recommended solution anneal | ≈ 1,177 °C (2,150 °F), rapid cool |
Selection rule of thumb: if the duty is hot gas — combustion, furnace, exhaust, carburising — X is the first alloy to price. If the duty is liquid acid, move straight to C-276 / C-22 / B-3 and do not pay X prices for a wet-corrosion job it was never designed for.
| Industry | Typical Hastelloy X components |
|---|---|
| Aerospace / gas turbines | Combustor cans and liners, transition ducts, afterburner components, tailpipes, spray bars |
| Industrial furnaces / heat treatment | Furnace rolls, retorts, trays, baskets, radiant tubes, support mesh and fixtures |
| Petrochemical | Catalyst support grids and furnace components in ammonia and ethylene production; reformer and cracker internals |
| Power / nuclear | High-temperature heat-exchanger and reactor-system components, gas-cooled reactor hardware |
| Commercial heat processing | Brazing and annealing fixtures, muffles, thermocouple protection tubes in mixed atmospheres |
No — annealed X is essentially non-magnetic (permeability ≈1.002). It is a fully austenitic solid-solution alloy with no age-hardening phases.
No. X is a solid-solution alloy; its high-temperature strength comes from Mo/W in solution plus grain-boundary carbides, not from ageing precipitates. If your specification asks for age-hardening heat treatments, you are probably thinking of Inconel X-750, Waspaloy or Nimonic grades.
No. The deliberately wider carbon range sustains grain-boundary carbide precipitation, which pins the boundaries and provides creep-rupture strength above about 800 °C. Sensitisation rules from stainless steel do not apply here — X spends its life at temperatures where those carbides are an asset, not a liability.
Different jobs. X is a high-temperature alloy (oxidation to ~1,200 °C, combustion and furnace duty); C-276 is a wet-corrosion alloy (hot HCl, H₂SO₄, mixed acids). Choosing X for liquid-acid service — or C-276 for a 1,000 °C furnace roll — are the two most common specification errors with this family.
Oxidation resistance extends to about 1,200 °C, but structural usefulness depends on stress: components carrying meaningful load are typically designed in the 870–980 °C band, where X still retains significant strength. For load-bearing furnace parts above that, Waspaloy or cobalt alloys such as Haynes 188 / 230-class alloys enter the conversation.
Send us your drawing or specification for a quotation — we reply within one business day.
Buy this grade as: Plate · Round bar · Seamless tube · Flanges