Butt-weld reducers in nickel alloys and specialty stainless, concentric for vertical lines and eccentric for flat-bottom pipe racks. Smooth bore transitions to limit turbulence and erosion; matched wall thickness to the adjoining pipe schedule.
| Parameter | Our supply range |
|---|---|
| Types | Concentric · eccentric (flat side down) |
| Size | DN 15 – 600, any DN1×DN2 combination |
| Wall | SCH 10 – SCH 160, matched to adjoining pipe |
| Condition | Solution annealed · bevelled · heat-number marked |
| Typical standards | ASTM B366 / B16.9 / B16.28, MSS-SP43 |
Click any grade to open its full data sheet: composition, mechanical properties, corrosion behaviour and standards.
EN 10204 3.1 mill test certificate with every heat — chemistry, mechanicals and heat number matched to your packing list.
Waterjet, plasma, saw cutting and CNC finishing to your drawing — including heat numbers marked on each cut piece.
Third-party inspection (SGS / TUV / BV) welcome before shipment; seaworthy crates and bundles for export.